plastic yielding meaning in English
塑性变形
塑性屈服
Examples
- A tension member may fail by plastic yielding .
拉伸元件可能由于塑性屈伏而破坏。 - Plastic yield test
塑料变形测试 - The calculation results indicate that the outboard of drum walls fall in plastic yielding at the same time the rising cooling water reaches the height of that point and the yield region becomes narrower and narrower when it comes closer to the circumferential strake weldments , which explains the reason coke drums experience bulging and cracks occur in the weld seams portions of shell to shell after long in service
计算结果表明：塔壁外侧在冷却水面到达的瞬间进入塑性屈服，筒节中部塑性屈服区较大，当靠近焊缝时塔壁的塑性变形区逐渐缩小直至消失，塔壁塑性屈服区的分布特点解释了塔体长期使用后发生鼓凸变形及简体与焊缝连接处产生裂纹的原因。 - This paper investigated the electrorheological ( er ) characteristics of two suspensions of starch particles ( a ) and aluminosilicate particles ( b ) in silicone oil respectively , and also their transmitting properties on a simulated device of cylindrical er clutch ( erc ) by comparison , only to show that a is a kind of electrorheological fluid ( erf ) with definite plastic yield - point and can be subjected to a narrow voltage range on erc , while b is a kind of pseudo - plastic erf and can be subjected to a wilder voltage range on erc
本文研究了硅油-淀粉( a ) 、硅油-硅酸铝( b )两种er流体的电流变性能，并通过一套筒式er离合器模拟传动装置，研究且对比了这两种er流体在筒式er离合器上的传输特性。结果表明a是具有塑性屈服点的流体，其在er离合器上有效调速电场范围较小； b是假塑性流体，其在er离合器上有效调速电场范围较宽。 - That the arched roadway with the ratio of 0 . 2 between arch rise and roadway width is substituted fur rectangular roadway can obviously improve the stress state of roadway surrounding rocks , reduce the deformation and the plastic yield area of roadway surrounding rocks , greatly strengthening the stability of roadway surrounding rocks
采用矢跨比为0 . 2的圆弧拱巷道代替矩形巷道，可显著改善巷道围岩应力状况，减小巷道围岩变形量，减少围岩塑性屈服区域，加强巷道围岩的稳定性。